PC Anywhere and similar products
Note: Configure PCAnywhere for RTS/CTS flow control and Error Correction Off (AWRemote). The multiplexers
will do the error correction. Starting with PCA DOS V5.0, error correction is in the AW.INI file under the section
[Remote] as "Error=0". Connection type should be DIRECT with DCD used to stop/start session. Set flow
control on the mux ports to CTS Busy Low (CBL).
PC 9 pin to mux cable
| PC
DE9P | Direction | SR
RJ45 | SPL
DB25P | Signal |
|---|
| 1 | <=== | 2 | 8 | DCD |
| 2 | <=== | 5 | 3 | RxD |
| 3 | ===> | 6 | 2 | TxD |
| 4 | ===> | 8 | 4 | RTS |
| 5 | ==== | 4 | 7 | SG |
| 6 | <=== | 1 | 6 | DSR |
| 7 | ===> | 3 | 11 | Busy |
| 8 | <=== | 7 | 5 | CTS |
Available from DCB as Remote PC 9 Adaptor, Line Cord, and SPL Port Adaptor
PC 25 pin to mux cable
| PC
DB25P | Direction | SR
RJ45 | SPL
DB25P | Signal |
|---|
| 2 | ===> | 6 | 2 | TxD |
| 3 | <=== | 5 | 3 | RxD |
| 4 | ===> | 3 | 11 | Busy |
| 5 | <=== | 7 | 5 | CTS |
| 6 | <=== | 1 | 6 | DSR |
| 7 | ==== | 4 | 7 | SG |
| 8 | <=== | 2 | 8 | DCD |
| 20 | ===> | 8 | 4 | RTS |
Available from DCB as Remote PC 25 Adaptor, Line Cord, and SPL Port Adaptor