|
|
|
-----------
Four Port EtherPoll EPL-2 VERSION 1.05 7/23/2014 The previous release, v1.04 was not released. This release adds the following feature: - The Etherpoll can be configured to discover and respond to a peer device's UDP port. This behavior is controlled via a new Advanced option called "Lock Destination Port". The default is "on", which mimics the original Etherpoll behavior of always sending data to the configured UDP port. The setting "off" unlocks the destination port and allows the Etherpoll to change the destination port, matching it to the peer's source port.-----------
Four Port EtherPoll EPL-4 VERSION 1.06 7/23/2014 The previous release, v1.05 was not released. This release adds the following feature: - The Etherpoll can be configured to discover and respond to a peer device's UDP port. This behavior is controlled via a new Advanced option called "Lock Destination Port". The default is "on", which mimics the original Etherpoll behavior of always sending data to the configured UDP port. The setting "off" unlocks the destination port and allows the Etherpoll to change the destination port, matching it to the peer's source port.-----------
Four Port EtherPoll EPL-4 VERSION 1.04 7/25/2011The transmit-timer mode did not function correctly. Regardless of how the configuration option was set, the unit would always operate in idle-timeout mode. (Note: This correction may cause problems for current customers if they upgrade firmware since it will change the default behaviour of the unit.) There was a flaw in the timing routines that would cause the transmit-timer/idle-timeout timer to prematurely trigger once every second.
-----------
Encrypted EtherPoll EEP-2 VERSION 1.04 7/25/2011The transmit-timer mode did not function correctly. Regardless of how the configuration option was set, the unit would always operate in idle-timeout mode. (Note: This correction may cause problems for current customers if they upgrade firmware since it will change the default behaviour of the unit.) There was a flaw in the timing routines that would cause the transmit-timer/idle-timeout timer to prematurely trigger once every second.
-----------
Two Port EtherPoll EPL-2 VERSION 1.03 7/25/2011The transmit-timer mode did not function correctly. Regardless of how the configuration option was set, the unit would always operate in idle-timeout mode. (Note: This correction may cause problems for current customers if they upgrade firmware since it will change the default behaviour of the unit.) There was a flaw in the timing routines that would cause the transmit-timer/idle-timeout timer to prematurely trigger once every second.
-----------
Two Port EPL-2VERSION 1.0 3/26/2007 This is the initial release of the firmware for the new hardware platform.-----------
 |
|||
| Data Comm for
Business Inc. 2949 County Road 1000 E Dewey, Il 61840 |
Voice:
217-897-6600 Toll Free: 800-4-DCB-NET Toll Free: 800-432-2638 |
Email: Contact Page Web: www.dcbnet.com Fax: 217-897-8023 |
|
| All DCB web pages copyright ©1995- Data Comm for
Business, All rights reserved. EtherPath®, EtherSeries®, EtherPoll®, EtherBridge® and EtherModem® are Registered Trademarks of Data Comm for Business, Inc. |
|||