|
|
|
----------
VERSION 2.02 February 13,2019 1.0 INTRODUCTION This release adds the following feature: - Propagation of link-loss from one interface to another. This is an optional feature, configured from "Lan1_IP - Speed/Duplex" web page. By default, it is disabled. This feature was requested by a customer. They needed a link-loss on LAN2 to propagate to a link-loss on LAN1 in order to quickly induce fail-over to an alternate path. This release corrects the following: The device was responding the ARP requests on the LAN2 interface. The LAN2 interface is on the untrusted L2 network and should ignore all IP related traffic.----------
VERSION 1.02 February 13,2013 1.0 INTRODUCTION This release corrects a problem extracting the configuration file from the unit.----------
VERSION 1.01 November 13, 2012 This release adds the following feature: 1.0 INTRODUCTION This release adds the ability to set the Ethernet port speed and duplex. Gigabit operation still requires that auto-negotiation be enabled. Otherwise the user can force the ports to 10M or 100M, half or full duplex.----------
LLEA VERSION 1.00 April 2011
1.0 INTRODUCTION
This is the initial release of the LLEA firmware----------
 |
|||
| Data Comm for
Business Inc. 2949 County Road 1000 E Dewey, Il 61840 |
Voice:
217-897-6600 Toll Free: 800-4-DCB-NET Toll Free: 800-432-2638 |
Email: Contact Page Web: www.dcbnet.com Fax: 217-897-8023 |
|
| All DCB web pages copyright ©1995- Data Comm for
Business, All rights reserved. EtherPath®, EtherSeries®, EtherPoll®, EtherBridge® and EtherModem® are Registered Trademarks of Data Comm for Business, Inc. |
|||