Security and Encryption Products

We provide a diverse line of security and encrypted communications products ranging from high speed encrypted multi-point ethernet bridges to simple serial RS-232 encrypters. Full data sheets for these products are avaible here.

Most product manuals are also available for download directly from the data sheets.

Security Products

ET-3302 10BaseT Ethernet Encrypterd


imgimg
 


img
Security and Encryption Products

LLEA Layer Two Encryption Appliance
img The new LLEA, a high performance layer two encryption appliance is an easily configured "lump in the cord" encrypter for gigabit ethernet links. With throughput greater than 500 Mbps (using AES-128), it fulfills many government, critical infrastructure ( CIPS ) and healthcare ( HIPAA) requirements for a FIPS 140-2 level 1 encrypted link.

UT-3302 Encrypted Ethernet Tunnel
img The UT-3302 bridges provide an encrypted Ethernet tunnel between two or more ethernet LANS with throughput of 10 Mbps or greater. The connection between the devices may be any ethernet network, broadband, wireless, etc. Industrial rated. The UT-3302s bridge all Ethernet protocols, including multi-cast, without the complexity of a full VPN install. The UT-3302 uses AES encryption. It works well in pairs, multiples, or along with the high performance UT-6602. Both are available with a wide variety of power supply options.

UT-3300 Encrypted Ethernet Tunnel
img The UT-3300 bridges provide an encrypted Ethernet tunnel between two or more ethernet LANS. The connection between the devices may be any ethernet network, broadband, wireless, etc. Industrial rated. The UT-3300s bridge all Ethernet protocols, including multi-cast, without the complexity of a full VPN install. The UT-3300 uses AES encryption. It works well in pairs, multiples, or along with the high performance UT-6602. Both are available with a wide variety of power supply options. The UT-3302 replaced the UT-3300 and is interoperable with existing UT-3300 units.

UT-6602 Encrypted Ethernet Tunnel
img The UT-6602 bridge is the higher throughput member of the UT family of encrypted ethernet bridges. It provides an encrypted ethernet tunnel between two or more ethernet LANS. This model is usually deployed as the host end of a multiple site network, or used in pairs for higher performance links. It contains multiple ethernet interfaces, includiong optional Wifi or with sustained encryption throughput greater than 10Mbps. The connection between the devices may be broadband, wireless, or cellular-broadband. The UT bridges all Ethernet protocols, including multi-cast, without the complexity of a full VPN install. The UT uses AES encryption, and all UT family devices interoperate.

UT-6630 Encrypted Ethernet Tunnel
img The UT-6630 bridge is the highest throughput member of the UT family of encrypted ethernet bridges. It provides an encrypted ethernet tunnel between two or more ethernet LANS. This model is usually deployed as the host end of a multiple site network, or used in pairs for higher performance links. It contains two 10/100/1000BaseT interfaces with sustained encryption throughput greater than 300Mbps. The connection between the devices may be any suitable high speed ethernet connection. The UT bridges all Ethernet protocols, including multi-cast, without the complexity of a full VPN install. The UT uses AES encryption, and all UT family devices interoperate.

UT-SOFT UT series Software Client
img UT-SOFT is a Windows (or linux) software client that allows a PC workstation to operate as a client on any UT bridge network. The UT-Soft PC client software works in conjuction with the UT-3300 or UT-6602 encryption server. It allows a PC to participate in the encrypted network without additional hardware at the client location. This software is compatible with modern versions of Microsoft Windows as well as Windows emulation on Apple computers.

FT-6602 Encrypted Ethernet Tunnel
img The FT-6602 encrypted ethernet tunnel is based upon a FIPS certified encryption module. This encrypted bridge combines an embedded FIPS 140-2-validated cryptographic module with our reliable, easily configured encryption product family. It provides an encrypted ethernet tunnel between two or more ethernet LANS. It provides sustained encryption throughput greater than 6 Mbps. The FT bridges all Ethernet protocols, including multi-cast, without the complexity of a typical full VPN install.

ET-3302 Encrypted Ethernet Tunnel
img The ET-3302 bridge provides an encrypted Ethernet tunnel between two or more ethernet LANS. The connection between the devices may be any valid TCP/IP connection, including wireless and Internet. The ET-3302 bridges all Ethernet protocols without the complexity of a full VPN install. The ET-3302 uses AES encryption and interoperates with the entire ET family of secure briding products. It is available with a wide variety of power supply options.

ET-6600 Encrypted Ethernet Tunnel
img The ET-6600 bridges provide an encrypted Ethernet tunnel between two or more ethernet LANS. The connection between the devices may be broadband ethernet or PPP dial-up. Industrial rated, the ET-6600 bridges all Ethernet protocols without the complexity of a full VPN install. The ET-6600 uses 128 bit AES encryption. It interoperates with other ET famaily products and is available with a wide variety of power supply options..

ET-6602 Encrypted Ethernet Tunnel
img The ET-6602 bridge is the 10 Mbps throughput member of the ET family of encrypted ethernet bridges. It provides an encrypted ethernet tunnel between two or more ethernet LANS. This model is usually deployed as the host end of a multiple site network, or used in pairs for higher performance links. It contains three ethernet interfaces with sustained encryption throughput greater than 10Mbps. The connection between the devices may be broadband, wireless, ethernet, or cellular-broadband. The ET bridges all Ethernet protocols without the complexity of a full VPN install. The ET uses AES encryption, and all ET family devices interoperate.

ET-6630 High Performance Encrypted Ethernet Tunnel
img The ET-6630 is the highest performance member of the ET family Encrypted Ethernet Bridges. These provide an encrypted ethernet tunnel between two or more ethernet LANS. This model is usually deployed as the host end of a multiple site network, or used in pairs for high performance links. Each contains two 10/100/1000Mbps interfaces with sustained encryption throughput of 300 Mbps. The connection between the devices may be any valid TCP/IP path. The ET bridges all Ethernet protocols without the complexity of a full VPN install. The ET uses AES encryption. All ET family devices interoperate.

EST-9600 Synchronous Serial Via Encrypted Ethernet
img The EST-9600 is a single port synchronous HDLC serial server that tunnels any HDLC data stream via an encrypted ethernet link. Industrial rated. The EST-9600 handles the conversion of HDLC synchronous to ethernet protocols, and provides clocking signals at both ends of the circuit. The EST-9600 use AES encryption and is available with a wide variety of power supply options..

SE-6600 Serial Encrypter
img The SE-6600 is an industrial rated serial data encryption device featuring two serial ports, a device port and a network port. The SE-6600 uses AES 256-bit encryption, 128-bit block size, to encrypt point-to-point and multi-point lines using any serial media that terminates in RS-232 connections with throughput up to 115.2 Kbps.

SSE-R Serial Encrypter
img The SSE-R is an industrial rated serial data encryption device featuring two serial ports, a device port and a network port. The SE-6600 uses AES 128, 192 or 256-bit encryption, to encrypt point-to-point and multi-point lines using any serial media that terminates in RS-232 connections with throughput up to 115.2 Kbps. The SSE-R is RoHS compliant

Two Port Encrypted EtherPoll Ethernet Tunnel
img The Encrypted EtherPoll is a two port ethernet serial server that allows point-to-point or multi-drop devices to use Ethernet networks in a more secure manner. The Encrypted EtherPoll connects any async serial devices with an AES-128 encrypted link through a LAN or between LAN's via routers . The Encrypted EtherPoll is designed to support asynchronous polling protocols, such as Modbus or DNP, as well as non-protocol data transfers. For maximum flexibility, it is compatible with the one port EtherPoll products when used in unencrypted mode. One port may be connected to un-encrypted single port EtherPoll while the other connects with a network of AES Encrypted EtherPolls.


Complete Product Directory



img
Data Comm for Business Inc.
2949 County Road 1000 E
Dewey, Il 61840
Voice: 217-897-6600
Toll Free: 800-4-DCB-NET
Toll Free: 800-432-2638
Email: Contact Page
Web: www.dcbnet.com
Fax: 217-897-1331
Shopping cart is
HACKER SAFE certified sites prevent over 99.9 of hacker crime.
All DCB web pages copyright ©1995--2008 Data Comm for Business, All rights reserved.
EtherPath®, EtherSeries®, EtherPoll®, EtherBridge® and EtherModem® are Registered Trademarks of Data Comm for Business, Inc.