SPL RS-232 DataHub


Concentrator for SPL and SR multiplexers




FEATURES
DESCRIPTION
SPECIFICATIONS

General
Port Specifications
Network Specifications
Operating Modes
Indicators (front panel)
Network Management Port
Network Management Port Commands
Physical/Electrical

APPLICATION

How To Order


FEATURES

DESCRIPTION
The SPL HUBs concentrate 2 to 8 SPL or SR multiplexers over a synchronous full duplex composite up to 64 Kbps. Users can use a "star" or "straight line" configuration to distribute clusters of terminals and printers in a economical way. HUBs eliminate multiple communication lines to a locale or the duplication of communication line services
on a "straight line" application. Savings on recurring line charges quickly pay for the HUB system and reduce the total fees subject to rate increases.

The SPL HUBs use a statistical time division method to concentrate the SPL or SR multiplexer composites. This method insures full bandwidth utilization and no degradation in response to the users attached to the multiplexers. The only limiting factor is the speed of the composite. With the availability of 56 Kbps digital service at "analog prices" users can take full advantage of this high speed service offering and save money.

Port connections to the SPL HUB can be direct connect SPL or SR multiplexers, synchronous or asynchronous, leased or dial-up lines, conventional or short haul modems, or digital service up to 38,400 bps. The flexibility of the HUB allows the user to tailor the system to take advantage of local line offerings and pricing while saving on
overall communications costs.

In the "star" configuration, SPL HUBs allow up to 8 SPL or SR multiplexers spread throughout a remote metropolitan area or building to share 1 high speed communication line back to the host site. This configuration eliminates the duplicate communication lines to a single metropolitan area.

In the "straight line" configuration, the SPL HUBs allow the connection of three sites in a "straight line" without duplicating the communication line to the first remote site. This capability can save significant communication costs especially if the first remote site is a significant distance from the host site.


SPECIFICATIONS
General
Statistical multiplexing of SPL or SR composites
2, 4, 6 or 8 ports
Port Specifications
Synchronous Rates: Follows modem clocks to 38,400 bps
Asynchronous Rates: 300, 1200,2400,4800, 9600, 19200, 38400 bps individually selectable per port
Interface: CCITT V.24, RS-232-D
Connectors: DB-25 female
Buffering: 64K dynamically allocated
Tail Circuits:
Must be full duplex
May be leased line, dial-up or digital
May be asynchronous or synchronous
Network Specifications
Rates: Follows modem/DSU clock to 64 Kbps synchronous
Interface: CCITT V.24, RS-232-D
Connector: DB-25 male
Operating Modes
Normal on-line
Network loopback
Indicators (front panel)
Power, Transmit Condition, Receive Error,
Multiplexing, Test, Port Activity
Network Management Port
Interface: CCITT V.24, RS-232-D
Connector: DE-9 female
Network Management Port Commands
Help Screen
Help Ports
Executive Parity
Network Loopback
Set Time

LOCAL & REMOTE:
Show Configuration
Configure Ports
Device Type
Identification
Port ID
Reset
Physical/Electrical
Power requirements: 120 VAC, 30-40 Watts, .25 - .36 Amps
10 1/4" x 9 3/4" x 2 1/4" (2-6 ports)
10 1/4" x 9 3/4" x 4 1/2" (8 ports)

Rear view of DCB SPL HUB


APPLICATION


How to Order

HOST or REMOTE:

SPL-02 2 Port Hub $1,095
SPL-04 4 Port Hub $ 1,495
SPL-06 6 Port Hub $1,795
SPL-08 8 Port Hub $ 2,295
SPL-10 10 Port Hub $ 2,595

img
Data Comm for Business Inc.
2949 County Road 1000 E
Dewey, Il 61840
Voice: 217-897-6600
Toll Free: 800-4-DCB-NET
Toll Free: 800-432-2638
Email: Contact Page
Web: www.dcbnet.com
Fax: 217-897-8023
All DCB web pages copyright ©1995--2017 Data Comm for Business, All rights reserved.
EtherPath®, EtherSeries®, EtherPoll®, EtherBridge® and EtherModem® are Registered Trademarks of Data Comm for Business, Inc.