Data Comm for Business, Inc.

Fiber Optic Modem


Fiber Optic Modem with Single or Dual Full Duplex Links


  • Fiber Optic Modem/Line Driver
  • For 850 nm multimode or 1300 single mode fiber
  • Point to point or daisy chained multipoint
  • RS-232 or RS-422 interface
  • Speeds to 1.5 Mbps
  • Anti-streaming timer option
  • LED indicators
  • -40 to +75 C operation
img

FEATURES
DESCRIPTION
SPECIFICATIONS

Customer Equipment Interface
Fiber Line Interface
Controls and Indicators
Operational Modes
Physical/Electrical
How to Order

APPLICATION


FEATURES

DESCRIPTION
The FOM-02MSA Fiber Optic Line Driver transmits asynchronous data up to 1.5 Mbps over 5 Km of fiber optic cable (Up to 30+ miles with single mode cable). It can be used point-to-point or can be daisy chained. Four models are available, 850 nm for multi-mode fiber and 1300 nm for single mode fiber, and each with one or two fiber interfaces.

In daisy-chain mode (using the model with two fiber interfaces), the unit has a pair of emitters and a pair of detectors. The FOM-2MSA can be set up as a Master or Remote unit. A multidrop circuit has only one Master, located at the host computer, which sends out polling data to downstream Remote units. In the master mode, transmit data from the RS-232 interface is sent downstream to the Remote units, in parallel over the two emitters. Receive data coming in on the detectors is OR'ed and is presented on the RS-232 interface. In the remote mode, the data is daisy chained. Data coming in on detector 1 is sent to the RS-232 receive port, and is regenerated to the emitter 2 fiber optic link. Data coming in on detector 2 is regenerated and sent out over emitter 1 and this data is not seen on the Local RS-232 interface. RS-232 transmit data on the local unit is sent out over emitter 1, upstream back to the master.

The FOM-02MSA has an RJ-45 jack which is used to connect the unit to modem links. This allows a combination of fiber and wire links on the same traffic control or other polling system.


SPECIFICATIONS
DTE Interface
DTE Port Interface
Fiber Line Interface

Controls and Indicators
Operational Modes
Master mode
Emitters 1 and 2 operate in parallel, sending data downstream from the RS-232 interface. Detectors 1 and 2 are logically OR'd back to the RS-232 interface.
Local Mode, Daisy chain
Data comes in on fiber detector 1, passed on downstream on emitter 2 and is presented on the RS-232 interface. Data coming upstream to the unit on detector 2 is passed upstream on emitter 2.
Daisy Chain
Links may be daisy chained, where the unit will regenerate data over the second full duplex fiber link. The choices are implemented via DIP switch.
Physical and Electrical
Rear view


APPLICATION
img

How to Order

FOM-02MM/SA 2-Port Fiber Optic Modem, Multimode (850nm), standalone $495
FOM-01MM/SA 1-Port Fiber Optic Modem, Multimode (850nm), standalone $445
FOM-02MM/RM 2-Port Fiber Optic Modem, Multimode (850nm), rackmount $495
FOM-01MM/RM 1-Port Fiber Optic Modem, Multimode (850nm), rackmount $445
FOM-02SM/SA 2-Port Fiber Optic Modem, Singlemode (1300nm), standalone $1395
FOM-01SM/SA 1-Port Fiber Optic Modem, Singlemode (1300nm), standalone $995
FOM-02SM/RM 2-Port Fiber Optic Modem, Singlemode (1300nm), rackmount $1395
FOM-01SM/RM 1-Port Fiber Optic Modem, Singlemode (1300nm), rackmount $995

img
Data Comm for Business Inc.
2949 County Road 1000 E
Dewey, Il 61840
Voice: 217-897-6600
Toll Free: 800-4-DCB-NET
Toll Free: 800-432-2638
Email: Contact Page
Web: www.dcbnet.com
Fax: 217-897-1331
Shopping cart is
HACKER SAFE certified sites prevent over 99.9 of hacker crime.
All DCB web pages copyright ©1995--2008 Data Comm for Business, All rights reserved.
EtherPath®, EtherSeries®, EtherPoll®, EtherBridge® and EtherModem® are Registered Trademarks of Data Comm for Business, Inc.